【收藏】2021版美標《IFI緊固件標準手冊》（第11版）目錄大全

　　簡介

　　美國工業緊固件協會（Industrial Fastener Institute，簡稱IFI）宣布推出2021版《IFI緊固件標準手冊》?！禝FI緊固件標準手冊》匯編了最常用的英制緊固件和非ISO公制緊固件標準。

　　新版包含96個由 ASTM、ASME、SAE和IFI發布的獨立標準規范，并且還包括自2018年版以來修訂的36項標準，以及幾項新標準。2021版《IFI緊固件標準手冊》是美國工業緊固件協會出版的第11版標準書。此版本展現了自1941 年第一版出版以來，美國緊固件標準和實踐持續發展的80年光輝歷程。在此期間，該手冊發行面覆蓋全球主要的制造和建筑行業?！禝FI緊固件標準手冊》素有緊固件“圣經”的美譽，而2021版《標準手冊》繼續行使它的使命，為緊固件應用行業及其服務企業提供熱忱服務。

　　2021年版的標題與2018年版一樣，不包含“英寸”一詞，因為其中包含的許多共識標準已合并為“英寸/公制雙標準”。這種合并是緊固件標準委員會、ASTM F16、ASME B18 和SAE 緊固件委員會為撤回多余的ASTM、ASME和SAE公制緊固件標準而采用ISO公制緊固件標準所做的更大努力的一部分。盡管標題中省略了“英制”一詞，但這本書從根本上仍然是英制緊固件標準的綜合參考來源。

　　目錄 TABLE OF CONTENTS


　　THREADS

　　ASME B1.1-2019 Unified Inch Screw Threads (UN, UNR, and UNJ Thread Forms)

　　ASME B1.2 1983 (R2017) Gages and Gaging for Unified Inch Screw Threads

　　ASME B1.3-2007 (R2012) Screw Thread Gaging Systems for Acceptability: Inch and Metric Screw Threads (UN, UNR, UNJ, M and MJ)

　　IF1-301 2008 (R2013) Gage Calibration Requirements and Procedures for Thread Gages


　　BOLTS, STUDS AND THREADED ROD

　　DIMENSIONS

　　ASME B18.2.1-2012 Square, Hex, Heavy Hex, and Askew Head Bolts and Hex, Heavy Hex, Hex Flange, Lobed Head, and Lag Screws

　　ASME B18.5-2012 (R2017) Round Head Bolts

　　ASME B18.9-2012 (R2017) Plow Bolts

　　ASME B18.10- 2006 (R2016) Track Bolts and Nuts

　　ASME B18.31.2-2014 Continuous Thread Stud, Studs for Flange Bolting (Stud Bolt), and Double-End Studs (Inch Series)

　　ASME B18.31.3-2014 Threaded Rods

　　ASME B18.31.5-2011 (R2016) Bent Bolts (Inch Series)

　　IFI -111-2014 Hex Flange Screws

　　IFI-115-2014 Flange 12-Point Screws

　　IFI-148-2002 (R2013) Threaded Projection Weld Studs

　　IFl -199-2014 Tap Bolts (Inch Series)

　　MATERIAL AND PHYSICAL

　　SAEJ429-2014 Mechanical and Material Requirements for Externally Threaded Fasteners

　　ASTMA193/A193M-20 Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications

　　ASTM A307-14e1 Carbon Steel Externally Threaded Standard Fasteners

　　ASTM A320/A320M-18 Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service

　　ASTM A354-17e2 Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners

　　ASTM A394-08 (R2015) Steel Transmission Tower Bolts, Zinc Coated and Bare

　　ASTM A449-14 (R2020) Hex Cap Screw, Bolts and Studs, Steel, Heat Treated,120/105/90 ksi Minimum Tensile Strength, General Use

　　ASTM A540/A540M-15 Alloy-Steel Bolting for Special Applications

　　ASTM A962/A962M-19 Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range

　　ASTM A1082/A1082M-16 High Strength Precipitation Hardening and Duplex Stainless Steel Bolting for Special Purpose Applications

　　ASTM F468-16 Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use

　　ASTM F593-17 Stainless Steel Bolts, Hex Cap Screws, and Studs

　　ASTM F901-20 Aluminum Transmission Tower Bolts and Nuts

　　ASTM F1554-18 Anchor Bolts, Steel, 36, 55 and 105-ksi Yield Strength


　　SOCKETS

　　DIMENSIONS

　　ASME B18.3-2012 Socket Cap, Shoulder, Set Screws, and Hex Keys (Inch Series)

　　MATERIAL AND PHYSICAL

　　ASTM A574-17 Alloy Steel Socket-Head Cap Screws

　　ASTM F835-20 Alloy Steel Socket Button and Flat Countersunk Head Cap Screws

　　ASTM F837-20 Stainless Steel Socket Head Cap Screws

　　ASTM F879-15 (R2020) Stainless Steel Socket Button and Flat Countersunk Head Cap Screws

　　ASTM F880-12 (R2017) Stainless Steel Socket, Square Head, and Slotted Headless-Set Screws

　　ASTM F912-11(R2017) Alloy Steel Socket Set Screws


　　STRUCTURAL FASTENERS

　　DIMENSIONS

　　ASME B18.2.6-2019 Fasteners for Use in Structural Applications

　　MATERIAL AND PHYSICAL

　　ASTM F959/F959M-17a Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners, Inch and Metric Series

　　ASTM F3125-19e2 High Strength Structural Bolts and Assemblies, Steel and Alloy Steel, Heat Treated, Inch Dimensions 120 ksi and 150 ksi Minimum Tensile Strength, and Metric Dimensions 830 MPa and 1040 MPa Minimum Tensile Strength

　　ASTM F3148-17a High Strength Structural Bolt Assemblies, Steel and Alloy Steel, Heat Treated, 144ksi Minimum Tensile Strength, Inch Dimensions


　　NUTS

　　DIMENSIONS

　　ASME B18.2.2-2015 Nuts for General Applications: Machine Screw Nuts, Hex, Square, Hex Flange, and Coupling Nuts (Inch Series)

　　ASME B18.6.9-2010 (R2017) Wing Nuts (Inch Series)

　　ASME B18.16.4-2008 (R2013) Serrated Hex Flange Locknuts: 90,000 psi

　　ASME B18.16.6-2017 Prevailing Torque Locknuts

　　MATERIAL AND PHYSICAL

　　SAE J995-2017 Mechanical and Material Requirements for Steel Nuts

　　ASTM A194/A194M-20a Carbon Steel, Alloy Steel and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both

　　ASTM A563-15 Carbon and Alloy Steel Nuts

　　ASTM F467-13 (R2018) Nonferrous Nuts for General Use

　　ASTM F594-09 (R2020) Stainless Steel Nuts

　　IFI-101 2002 (R2013) Torque-Tension Requirements for Prevailing-Torque Type Steel Hex and Hex Flange Nuts

　　IFI-155 2005 (R2013) Test Procedure for the Performance of Nonmetallic Resistant Element Prevailing-Torque Nuts

　　IFI-160-2007 (R2013) Test Procedure for the Performance of Nuts with Pre-Applied Adhesive Coated Threads


　　SCREWS

　　ASME B18.6.1-1981 (R2016) Wood Screws

　　ASME B18.6.2-1998 (R2010) Slotted Head Cap Screws

　　ASME B18.6.3-2013 Machine Screws, Tapping Screws, and Metallic Drive Screws

　　ASME B18.6.8-2010 (R2017) Thumb Screws and Wing Screws

　　ASME B18.13-2017 Screw and Washer Assemblies –SEMS

　　IFl-113-2015 Steel Self-Drilling Tapping Screws

　　ASTM C954-18 Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs from 0.033 in. (0.84 mm) to 0.112 in. (2.84 mm) in Thickness

　　ASTM C1002-18 Steel Self-Piercing Tapping Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs

　　ASTM C1513-18 Steel Tapping Screws for Cold-Formed Steel Framing Connections


　　WASHERS

　　ASME B18.21.1-2009 (R2016) Washers: Helical Spring-Lock, Tooth Lock and Plain Washers (Inch Series)

　　ASTM F436/F436M-19 Hardened Steel Washers Inch and Metric Dimensions

　　ASTM F2437/F2437M-17 Carbon and Alloy Steel Compressible-Washer-Type Direct Tension Indicators for Use with Cap Screws, Bolts, Anchors, and Studs


　　RIVETS

　　ASME B18.1.1-1972 (R2016) Small Solid Rivets 7/16 In. Nominal Diameter and Smaller

　　ASME B18.1.2-1972 (R2016) Large Rivets 1/2 In. Nominal Diameter and Larger

　　ASME B18.7-2007 (R2017) General Purpose Semi-Tubular Rivets, Full Tubular Rivets, Split Rivets and Rivet Caps

　　IFI-110-2003 (R2013) Glossary of Terms Relating to Blind Rivets

　　IFI-114-2015 Break Mandrel Blind Rivets

　　IFl-116-2015 Multi-Grip Break Mandrel Blind Rivets

　　IFl-117-2003 (R2013) Pull Through Mandrel Blind Rivets

　　IFl-119-2003 (R2013) Structural Flush Break Pull Mandrel Self-Plugging Blind Rivets

　　IFI-123-2003 (R2013) Drive Pin Blind Rivets

　　lFI-126-2003 (R2013) Break Mandrel Closed End Blind Rivets

　　IFl-130-2003 (R2013) Structural Splitting Self-Plugging Pull Mandrel Blind Rivets

　　IFI-134-2015 Multi-Grip Flush Break Pull Mandrel Self-Plugging Blind Rivets

　　IFl-135-2013 Mechanical Testing of Blind Rivets

　　IFI-137-2003 (R2013) Inspection and Quality Assurance for General Purpose Blind Rivets


　　PINS

　　ASME B18.8.1-2014 Clevis Pins and Cotter Pins

　　ASME B18.8.2-2000 (R2010) Taper Pins, Dowel Pins, Straight Pins, Grooved Pins, and Spring Pins

　　FINISHES

　　ASTM B695-04 (R2016) Coatings of Zinc Mechanically Deposited on Iron and Steel

　　ASTM F1941/F1941M-16 Electrodeposited Coatings on Mechanical Fasteners, Inch and Metric

　　ASTM F2329/F2329M-15 Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners

　　ASTM F3393-20e1 Zinc-Flake Coating Systems for Fasteners

　　QUALITY

　　ASME B18.2.9-2010 (R2017) Straightness Gage and Gaging for Bolts and Screws

　　ASME B18.18-2017 Quality Assurance for Fasteners

　　ASTM A370-20 Standard Test Methods and Definitions for Mechanical Testing of Steel Products

　　ASTM F606/F606M-19 Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets

　　ASTM F788-20 Surface Discontinuities of Bolts, Screws, Studs, and Rivets, Inch and Metric Series

　　ASTM F812-12 (R2017) Surface Discontinuities of Nuts, Inch and Metric Series

　　ASTM F1470-19 Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection

　　ASTM F2282-18 Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners

　　ASTM F2328-17 Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts

　　IF1-124-2002 (R2013) Test Procedure for the Performance of Nonmetallic Resistant Element Prevailing-Torque Screws

　　IFI-125-2007 (R2013) Test Procedure for the Performance of Adhesive Coated Prevailing-Torque Screws

　　IFI-143-2002 (R2013) Test for Evaluating the Torque-Tension Relationship on Both Externally and Internally Threaded Fasteners


　　GRADE MARKINGS

　　REFERENCES

　　Standards References

　　INDEXES

　　Index by Designation

　　Index by Keyword

　　欲了解更多相關信息或購買標準書籍，可致電金蜘蛛緊固件網：020-38861363。

　?。▉碓矗航鹬┲刖o固件網）